New User!

Here you will find the latest information about GB7LN
2e0kvr
Posts: 1
Joined: Wed Aug 02, 2017 2:29 pm

New User!

Postby 2e0kvr » Sun Aug 06, 2017 10:43 pm

Hello All,

I have been using DMR for the last few days, using a TYT MD-380 with custom firmware and programmed via the info I have obtained from the web.
S1 TG1, S1 TG2, S1 TG3, S1 TG9, S1 TG13, S1 TG235.
S2 TG9, and user activated S2 TG820, S2 TG850 and S2 TG860. Plus the 9990 Echo.

I have managed to make QSO's on S2 TG9 on reflector 4400, but don't hear anything on any other channel or TG.

Also I have added all the reflectors as digital contacts as well as all the TG's.

Manage to get status via 5000, but have no idea how to disconnect from 4400 and to another reflector, what is the process?

I have found it a big learning curve thus far. Bet I'm missing something simple.

Any help with how to QSY to another channel/reflector or user activated on the radio is much appreciated. Thx in advance.

73 Alan.

G0RZR
Site Admin
Posts: 37
Joined: Fri Dec 12, 2014 5:32 pm

Re: New User!

Postby G0RZR » Sat Aug 19, 2017 9:30 pm

Hi Alan,

Sorry for the delay in replying but I don't get on here as much as I would like to do.

Slot 1 has Worldwide TG91, Europe TG92, USA TG93 and VK TG505
If you use an old codeplug for the MD-380 with TG1,2 and 3 you won't receive anything !

If you want a codeplug for LN let me know and I'll send you one over to have a play with.

Regards,

Mick.

G0RZR
Site Admin
Posts: 37
Joined: Fri Dec 12, 2014 5:32 pm

Re: New User!

Postby G0RZR » Sun Aug 20, 2017 6:08 pm

If you look at the Brandmeister post above this one Alan, I have updated the information about changing reflectors on slot 2


Return to “INFORMATION”

Who is online

Users browsing this forum: No registered users and 1 guest